Skoda YETI - 11-2009 Owner's Manual page 241

240 Fuses and light bulbs
Removing the light bulb for the parking light (halogen headlight)
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow
fig. 198.
– Pull out the fixture in direction of arrow
– Take the faulty bulb out of the fixture and insert a new one.
– Insert the protective cap.
Removing the light bulb for the parking light (Xenon headlight)
– Switch the ignition and all lights off.
– Remove the rubber protective cap
– Pull out the fixture in direction of arrow
– Take the faulty bulb out of the fixture and insert a new one.
– Insert the protective cap.
Note
In order to facilitate the removal of the fixture with the bulb for the parking light
(halogen headlight), we recommend to remove first of all the connector of the bulb for
the low beam light.
Fig. 199 Removing the fixture for the
parking light (Xenon headlight)
A ⇒ page 239,
OPEN and remove it
1
A ⇒ page 239, fig.
198.
2
A ⇒ page 239, fig.
197.
B
A ⇒ fig.
199.
3
Main beam light and low beam light
– Switch the ignition and all lights off.
– Turn the protective cap in direction of arrow OPEN
remove it.
A
– Unplug plug .
A
A
– Press the wire clamps down until they are released from the secured position.
B
A
– Remove the light bulb and insert the new light bulb in such a way that the fixing
C
lugs of the light bulb socket fit into the recesses at the reflector.
Installation takes place in the reverse order.
Fog lights*
Fig. 200 Removing the bulb for the main
beam light and low beam light
⇒ page 239, fig. 198
and
Fig. 201 Removing the bulb for the fog
light