Tyre Inflation Pressure-Control System - Skoda YETI - 11-2009 Owner's Manual

If there is a fault in the power steering, the warning light
ment cluster ⇒ page 32.
WARNING
Contact your specialist garage if the power steering is defective.

Tyre inflation pressure-control system*

The tyre inflation pressure-control system compares with the aid of the ABS sensors
the speed and also the rolling circumference of the individual wheels. If the rolling
circumference of a wheel is changed, the warning light
cluster ⇒ page 35 and an audible signal sounds. The rolling circumference of the tyre
can change if:
•
the tyre inflation pressure is too low,
•
the structure of the tyre is damaged,
•
the vehicle is loaded on one side,
•
the wheels of an axle are loaded heavily (e.g. when towing a trailer or when driving
uphill or downhill),
•
snow chains are mounted,
•
the temporary spare wheel is mounted,
•
one wheel per axle was changed.
Using the system Safety
 or  lights up in the instru-
Fig. 156 Button for setting the tyre infla-
tion pressure control value

lights up in the instrument
Driving Tips
Basic setting of tyre inflation pressure-control system
After changing the tyre inflation pressures or after changing one or several wheels, the
position of a wheel on the vehicle (e.g. exchanging the wheels between the axles) or
when the warning light lights up while driving, a basic setting of the system must be
carried out as follows.
•
Inflate all tyres to the specified inflation pressure ⇒ page 215.
•
Switch on the ignition.
•
⇒ fig. 156
Press button
 

the warning light lights up. At the same time the memory of the system is erased
and the new calibration is started, which is confirmed with an audible signal and then
the warning light  goes out.
•

If the warning light does not go out after the basic setting, there is a fault in the
system. Have the vehicle inspected by your nearest specialist garage.
Warning light  lights up
If the tyre inflation pressure of at least one wheel is insufficiently inflated in comparison
to the stored basic value, the warning light
Warning light  flashes
If the warning light flashes, there is a system fault. Have the vehicle inspected by your
nearest specialist garage.
WARNING
•
When the warning light  lights up, immediately reduce the speed and
avoid sudden steering and brake manoeuvres. Please stop the vehicle without
delay at the nearest possible stop and inspect the tyres and their inflation pres-
sures.
•
The driver is responsible for the correct tyre inflation pressures. For this
reason, the tyre inflation pressures must be checked regularly.
•
Under certain circumstances (e.g. sporty style of driving, wintry or unpaved
roads) the warning light  can be delayed or does not light up at all.
•
The tyre inflation pressure-control system does not take away the respon-
sability from the driver for the correct tyre inflation pressure.
General Maintenance Breakdown assistance
Intelligent Technology
for more than 2 seconds. While pressing the button,
⇒
 lights up.
Technical Data
169