Using The System Safety - Skoda YETI - 11-2009 Owner's Manual

Opening and tilting
Comfort position
– Turn the switch to position
Opening fully
– Turn the switch to position
tion).
Tilting and closing
⇒ page 50, fig.
– Pull up the rear switch
– Press down the switch on the recess and then push it forward in order to close the
sliding/tilting roof.
The wind noise in the comfort position is less than when the roof is fully opened.
Caution
It may be necessary during winter to remove any ice and snow in the area of the
sliding/tilting roof before opening it in order to prevent damaging the opening
mechanism.
Closing
Sliding closed/closing the sliding/tilting roof
– Turn the switch to position
Safety closing
The sliding/tilting roof is fitted with a force limiter. The sliding/tilting roof stops and
moves back several centimetres when it cannot be closed because there is something
in the way (e.g. ice). You can close the sliding/tilting roof completely without force
limiter by pressing the switch to the
long as it takes for the sliding/tilting roof to close completely ⇒
Using the system Safety
A ⇒ fig.
42.
C
A
and hold it in this position (spring-tensioned posi-
B
42.
A ⇒ page 50, fig.
42.
A
A ⇒ page 50, fig. 42
position at the front for as
A
.
Driving Tips
WARNING
Close the sliding/tilting roof carefully - risk of injury!
Convenience operation
You can also close an open sliding/tilting roof from the outside.
– Hold the key in the locking cylinder of the driver's door in the lock position or press
the lock button of the remote control until the sliding/tilting roof is closed.
The closing operation stops when one releases the key or the lock button.
Note
The force limiter also operates for convenience closing.
Emergency operation
Fig. 43 Detail of the headliner: Points for positioning screwdriver / opening for positioning
the key
You can close and/or open the sliding/tilting roof by hand if the system is defect.
– Position the flat blade of a screwdriver carefully against the rear edge of the cover
of the electrical drive at the points of the arrows
– Pull the cover down.
General Maintenance Breakdown assistance
Unlocking and locking 51
A ⇒ fig.
43.
1
Technical Data