Table of Contents
Advertisement
150 Storage space and interior equipment ›
›
Fix the bar in the same way on the other side.
›
Snap the carabiners
into the lashing eyes.
B
›
Pull the straps firmly at the free ends
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under
the central body pillars.
Releasing
Loosening takes place in the reverse order for fixing.
Double-sided floor covering
Overview
Depending on the equipment, the vehicle may be
equipped with a double-sided floor covering in the
luggage compartment. One side is made of fabric,
the other side is washable.
Roll-up luggage compartment cover
Operation
Extending
Retracting
conditions.
Double-sided floor covering
.
C
›
Pull out the cover on
the handle until it clicks
into place.
›
Press the cover in the
handle area.
The cover rolls up to
the intermediate posi-
tion
.
A
Press again to fully
open the cover.
It is possible that the
cover rolls more slowly
during winter weather
Removing and inserting
Take out and insert the roll-up cover
Stowing the cover under the variable loading floor
›
Remove the variable loading floor.
Or:
›
Unfold the variable loading floor in the upper posi-
tion and lift it in the rear area.
front.
Variable loading floor in the boot
Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
›
Press the end of the
crossbar and take out
or insert the cover.
›
Insert the cover into
the recesses of the
side partitions and fold
the free part forwards
using the handle.
If the roll-up cover and
the multifunction bag
are stowed at the same
time, the roll-up cover
must cover the multi-
function bag at the
›
Lift the variable load
floor and pull it to-
wards you.
Advertisement
Table of Contents
