Calling Up Registration Memory Numbers In Order (Registration Sequence); Program A Registration Sequence - Yamaha DGX-670 Reference Manual

Calling Up Registration Memory Numbers in Order (Registration Sequence)

As convenient as the Registration Memory buttons are, there may be times during a performance when you
want to quickly switch between settings. The convenient Registration Sequence function lets you call up the
four setups in any order you specify, by simply using the TAB [E][F] buttons (in the Main display) or the
pedal as you play.

Program a Registration Sequence

1
If you intend to use a pedal or pedals to switch the Registration Memory number,
connect a pedal or pedal unit to the [AUX PEDAL] jack or the [PEDAL UNIT] jack.
2
Press the REGISTRATION MEMORY [BANK] button to call up the Registration Bank
Selection display, and then select the desired Bank to be programmed.
3
Call up the operation display.
[MENU] → Cursor buttons [][][E][F] Regist Sequence/Freeze, [ENTER] → TAB [E] Registration
Sequence.
4
If you use a pedal, specify here how the pedal will be used—to advance or to reverse
through the sequence.
Use the [8 ] (Pedal) buttons to call up the operation window.
• [5 ]/[6 ] (Prev.): Selects which pedal is used for reversing the Registration Sequence.
• [7 ]/[8 ] (Next): Selects which pedal is used for advancing the Registration Sequence.
AUX indicates the pedal connected to the [AUX PEDAL] jack, while Right, Center and Left indicate the
pedals of the pedal unit connected to the [PEDAL UNIT] jack.
Indicates the name of the currently selected
Registration Memory Bank.
Note that the pedal settings here (other than Off) will take priority over the settings in the Pedal page of
the Controller display
Sequence, make sure to set this to Off.
After making setups, press the [EXIT] button to close the window.
(page 75). If you want to use the pedal for a function other than Registration
DGX-670 Reference Manual
7
63