Initializing Registration Memory - Yamaha Electone STAGEA ELB-02 Owner's Manual

NOTE
Deleting Banks (page 117)
5
Reference Page
Factory Set (Initializing the
Electone) (page 27)
120
ELB-02 Owner's Manual
6

Initializing Registration Memory

Deleting all Registration data in Registration Memory initializes the Registration
Memory and restores the original factory-programmed Registration Memory
presets. Be careful when using this operation, since it erases all your existing data. In
order to avoid inadvertently losing your important data, save it to a USB flash drive.
If you want to delete a specific Bank, see "Deleting Banks" on page 117.
1
Press the [UTILITY] button to call up the Page 1 of the UTILITY
display.
If another page is shown, select Page 1 by using the Page buttons.
2
Press the [D] "INITIALIZE" button.
The message "Are you sure you want to initialize Registration data?" appears.
You can cancel the operation at this point by pressing the [D] "CANCEL"
button. Press [C] "INITIALIZE" button to actually initialize the data. When the
operation is complete, the Electone will be restarted.