Adjust The Volume Balance And Changing Voices - Mixing Console; Operation - Yamaha PortaTone PSR-A1000 Owner's Manual

Adjust the Volume Balance and Changing Voices
— Mixing Console
Set up just like a real mixing console, this display gives you comprehensive control over the sound.
You can call up additional basic mixing controls by using the [BALANCE] button and the [CHANNEL ON/OFF] button
(page 58).

Operation

MIXING CONSOLE
1
PART
PANEL PART
Includes the keyboard-played parts (Main/
Layer, Left), accompaniment parts, song.
STYLE PART
Accompaniment parts
SONG CH 1 - 8
Channels 1 - 8 of song playback
SONG CH 9 -16
Channels 9 - 16 of song playback
2
Select the other Mixing Console pages by using the [BACK]/
[NEXT] buttons and set the desired parameters.
For information on the various parameters and settings and how
to use them, refer to the explanations starting on page 113.
I About the parameters
• VOL/VOICE (Volume/Voice) (page 113)
This contains settings related to the volume and voice of each part/channel. Here you can also enable the Auto
Revoice feature — which automatically plays XG-compatible songs (page 143) with the rich and dynamic voices
that are exclusive to the PSR-A1000. This gives you much more authentic and realistic instrument sounds for your
song playback.
• FILTER (page 114)
These controls affect the tone quality of the voice, letting you add power, punch, or brightness to the sound.
• TUNE (page 114)
These give you various tuning controls.
• EFFECT (page 115)
These control the amount of effect applied to the sound.
112
PSR-A1000
MIXING CONSOLE
PART
From the MIXING CONSOLE display, press the button
repeatedly until the desired display is called up. Each press of the
button switches among the displays listed below.
Mixing Console
This set of controls
lets you adjust the
balance of the
voices and their ste-
reo position, as well
as the amount of
effect that is applied
to each voice.
You can quickly and easily
set all parts to the same
value for the same parame-
ter (except for the VOICE
parameter). Simulta-
neously hold down the [A] -
[J] button that corresponds
to the parameter you want
to change and use the [1] -
[8] buttons or the [DATA
ENTRY] dial to change the
value.
n
For details on parameters
related to the Sound Cre-
ator, see page 80.
Close the Mixing
E
Console display by
ND
pressing the [EXIT]
button.