Changing The Volume For Each Zone (Zone Control) - Yamaha CP 33 Owner's Manual

Changing the Volume for Each Zone (Zone Control)

The convenient [ZONE CONTROL] sliders allow you to adjust the volume of each zone independently while
you play the keyboard. Moving a slider up increases the volume while pulling the slider down decreases it.
When Dual or Split are enabled
ZONE CONTROL [ZONE 1] slider: Adjusts the Voice 1 volume
ZONE CONTROL [ZONE 2] slider: Adjusts the Voice 2 volume
When Dual or Split are not enabled
ZONE CONTROL [ZONE 1] slider: Adjusts the selected Voice volume
ZONE CONTROL [ZONE 2] slider: Does not affect the volume
Turning on the [MASTER] button switches the function assigned to the [ZONE CONTROL] sliders. Refer
to the "Using the Master Mode" on page 26.
In the case of Dual:
The lower value voice number in the VOICE/MASTER button ([1] -
[14]) will be designated as Voice 1. The other voice will be
designated as Voice 2.
In the case of Split:
The right voice will be designated as Voice 1.
The left voice will be designated as Voice 2.
Voice 2 (ZONE 2)
ZONE 1: Voice 1
ZONE 1 ZONE 2
ZONE 2: Voice 2
ZONE CONTROL
MASTER
MASTER EDIT
MASTER
Playing Voices
Voice 2 (ZONE 2)
Voice 1 (ZONE 1)
Voice 1 (ZONE 1)
CP33 Owner's Manual
25