Table of Contents
Advertisement
À
Select either [Front Only] or
[Front and Back].
À
Select [Blank Covers] or
[Printed Covers].
À
Select the cover stock tray.
Select [Save].
À
Load the documents and
select [Start].
Front & Back
Blank Covers
Printed Covers
Xerox Document Centre 440/432/420 User Guide
NOTE: When using covers with inserts, the cover tray can be
the same tray as one of the inserts tray. The cover stock must
be the same size and orientation as the body of the document.
Covers options
Off
the Covers feature is not available.
Front only
the machine automatically adds a cover page to the front of the
set of documents.
the machine automatically adds a cover page to the front and
back of the set of documents.
Once the Covers feature is selected the following two options
will be available:
the machine automatically adds a blank cover(s) to the
document. Blank sheets do not have to be added to the
documents.
the first (and last, if programmed) page of the set of documents
will be copied onto the cover stock. Blank sheets must be
added to the set of documents if only the front or the back cover
is to be printed.
Page 3-45
Advertisement
Table of Contents
