À
Select [Auto Clear].
À
Select [On] or [Off].
À
If [On] is selected, use the
scroll buttons to set the
timeout period.
À
Select [Low Power].
À
Use the scroll buttons to set
the timeout period.
Page 10-12
Low Power
Low Power Mode becomes active after the specified time of
machine non-use. When activated, the Touch Screen is blank
and the Power Saver light is on. When the Control Panel or
Touch Screen is selected, or the Platen cover lifted, the
machine responds within 1 second. All features are available
within 30 seconds.
NOTE: If the Low Power timeout is set higher than the timeout
for Power Save or Auto Off (depending on system
configuration), the machine displays a message that Low
Power cannot exceed Power Save (or Auto Off) .
Xerox Document Centre 440/432/420 User Guide