Table of Contents
Advertisement
Features button
À
Select [Features] on the
control panel to display the
default screen.
NOTE: The first Copy screen is
normally the default setting.
This can be changed by the
Key Operator.
Job Status button
À
Select [Job Status] on the
control panel.
À
The Print Queue is the
default setting and will be
automatically displayed.
À
Select [Other Queues] to
display the queues available.
Xerox Document Centre 440/432/420 User Guide
Select this button to access the feature screens. Each "screen"
is accessed by a tab. The first screen for each tabbed feature
contains all the basic settings required for each feature. For
example, the first Copy screen enables programming to make
a copy and the first Fax screen to send a fax. The additional
screens provide settings to allow further programming
selections.
Use Job Status to check on the progress of a job and if
necessary to change its position in a queue .
NOTE: The queues available are Dependant on the machine
configuration.
Page 2-15
Advertisement
Table of Contents
