Output is too light
Uneven print
Blurred images
Missing characters
Gloss variations (coining)
Light copies when scanning glossy, shiny,
or coated documents through the
Document Feeder
Ghosting
Xerox Document Centre 440/432/420 User Guide
Symptom
Recommendation
À
If the Copy/Print Cartridge is new, the
toner may not be dispensed.
À
Run off more prints until the copy quality
has improved.
À
Set the Image Quality feature to a darker
setting.
À
Replace the Copy/Print Cartridge.
À
Load fresh paper.
À
Load the documents, make a copy using
the Auto selections, collated to each
output tray.
À
Replace the Copy/Print Cartridge.
À
Load fresh paper.
À
Reinstall the Copy/Print Cartridge.
À
Check the quality of the documents.
À
If the document has large areas of solid
density, adjust the contrast.
À
Use the Document Glass instead of the
Document Feeder.
À
Check the quality of the documents.
À
If transparencies are used, select
Transparency on the touch screen. The
machine automatically adjusts the
quality for transparencies.
À
Feed the document short edge feed.
À
Replace the Copy/Print Cartridge.
Page 12-9