Table of Contents
Advertisement
Other Queues
Completed Print Jobs Queue
Page 7-8
all jobs can be set. Other jobs in the queue bypass this job and
are completed. After a problem has been resolved, or when
ready to print the held job, select the job and touch Release .
Delete
deletes the selected job from the Print Queue . After the job is
deleted, all of the resources allocated to that job are also
released. In an open system (no access control), any job can
be deleted by any user. If an active job is deleted, it stops
printing immediately and is placed in the Completed Print Jobs
Queue , where it is listed as Canceled by User. If a pending job
is deleted, it is removed from the Print Queue and is placed in
the Completed Print Jobs Queue , where it is listed as a
canceled job.
NOTE: Only the owner of a job should delete the job.
Details
displays additional programming information about the jobs in
the Print Queue. For held jobs, the Details screen includes
information about how to release the job
displays the other job queues available.
Maintains completed print jobs. Jobs are considered complete
when they are successfully printed, or terminated at the user's
request or due to a fault. The queue contains the last 50
completed print jobs. Jobs are maintained on a first-in, first-out
basis and organized in order of completion.
Use the scroll buttons to move through the jobs in the queue.
Xerox Document Centre 440/432/420 User Guide
Advertisement
Table of Contents
