Using Tools Mode; Entering Tools Mode - Xerox DocuColor 12 Supplementary Manual

Using Tools Mode

To change Edit Pad default settings you must
have the Administrator password and enter Tools
Mode. The procedures for entering and exiting
Tools Mode are described here.

Entering Tools Mode

KEY POINT: All previous programming
selections are canceled when you press the Clear
All button in the Tools Mode.
KEY POINT: You cannot program jobs while in
the Tools Mode.
1 Press the Administration button on the Control
Panel, found in Figure 2, to display the Access
screen, illustrated in Figure 3.
EDIT PAD USER GUIDE
Figure 2: Control Panel and Administration button
Figure 3: Access screen
8-3 SYSTEM ADMINISTRATION FUNCTIONS
8
3
4
5
7