Cancelling All Settings; Cancelling And Redefining An Area - Xerox DocuColor 12 Supplementary Manual

Cancelling all settings

•
Select No Edits on the Touch screen to
cancel all the selected settings.
NOTE: When Job Completion Timeout is set,
the selected features are reset automatically after
a fixed time. The Timeout features can be
adjusted in Tools Mode. For more information
refer to Chapter 8, System Administration
Functions.

Cancelling and redefining an area

Key Procedure
1 Select the Edit Number to be corrected. The Edit
Number indicator flashes.
2 For a selected Edit Number, you can either
cancel the selection or reprogram the selections.
Correcting or cancelling an area:
1.
Select Cancel Areas and the defined area
is cancelled.
2.
Redefine the area.
NOTE: You can not change the Area Shape at
this point. To change the Area Shape, cancel the
setting with Cancel Edit Number and select
again.
EDIT PAD USER GUIDE 7-3 CANCELLING SELECTIONS
7
1
3
4
5
6
7