Point Outside Area
NOTE: For more information on basic editing
procedures, see Chapter 3, "Basic Edit Pad
Procedure."
1
From the copier/printer Control Panel, touch
Editing on the Job Assembly tab.
2
Touch Areas Edited on the Editing screen.
3
Place your original document face-up on the Edit
Pad underneath the Clear Plastic Overlay.
4
Select an Edit Number. The Edit Feature
indicators of the selected number flashes.
5
Select the Edit Feature. The available Area
Shapes flash.
EDIT PAD USER GUIDE
5-15
SELECTING AN AREA SHAPE
1
Edit
Pad
3
5
6
7