NOTE: For more information on basic editing
procedures, see Chapter 3, "Basic Edit Pad
Procedure."
Edit
Pad
1
From the copier/printer Control Panel, touch
Editing on the Job Assembly tab.
3
2
Touch Areas Edited on the Editing screen.
4
3
Place your original document face-up on the Edit
Pad underneath the Clear Plastic Overlay.
4
Select an Edit Number. The Edit Feature
indicators of the selected number flashes.
5
Select the Edit Feature. The available Area
Shapes flash.
5
5
6
7
SELECTING AN AREA SHAPE
Point Whole Area
5-18
EDIT PAD USER GUIDE