Xerox DocuColor 12 Supplementary Manual page 35

The following illustration and table describe the Area Shapes, Select Area, and Cancel Areas
features on the Edit Pad Control Panel:
Call-out No.
9 Select Area Shape indica-
tors
10 Rectangle Area
11 Freehand
12 Point Outside Area
13 Point Whole Area
14 Select Area indicator
15 Enter Freehand Area
16 Enter Freehand Area
indicator
17 Cancel Areas
EDIT PAD USER GUIDE
Name
These indicators flash when you must select an area type.
When you select an area type, only that specific indicator
remains lit.
Use this feature to specify an area by using the Edit Pen to
point to opposite corners of a rectangle.
Use this feature to define an area by drawing an outline
around the area with the Edit Pen, or by making a series of
points around the desired shape.
Use this feature to specify an area by using the Edit Pen to
define a closed area between two boundaries.
Use this feature to specify an area by using the Edit Pen to
define an entire area within a boundary.
This indicator flashes when you must define an area on the
Edit Pad using the Edit Pen.
Use this feature to save a freehand area by touching with
the Edit Pen.
This indicator flashes when you have defined a freehand
area on the Edit Pad. You must select Enter Freehand
Area to save the freehand area(s).
Use this feature to cancel the defined area shape(s) for the
selected Edit Number.
2–9
Function
GETTING TO KNOW YOUR EDIT PAD
2
2
2
3
4
5
6
7