Defining An Area Shape - Xerox DocuColor 12 Supplementary Manual

You can select only one Area Shape for each
Edit Number. However, you can define multiple
areas of the same type.
Keep in mind the following Area Shape rules:
NOTE: You can define a maximum of 200 areas
for each original document.
•
Edit
Pad
•
Use the procedure on the following pages to
define an Area Shape.
3
To define an Area Shape:
4
5
5
6
7
SELECTING AN AREA SHAPE
You can make up to 4,000 points for each
original document.
An enclosed area can be no smaller than 3
mm in diameter or width.

Defining an Area Shape

1.
Lift the clear plastic overlay and place a
document on the upper right corner of the
Edit Pad.
2.
Lower the overlay.
3.
Touch the Edit Pen to the original to
define the position and/or size of the area
you want to edit. The spot you touch with
the Edit Pen is sensed electronically by
the Edit Pad.
5-2 EDIT PAD USER GUIDE