Applying Colors To Areas Difficult To Define - Xerox DocuColor 12 Supplementary Manual

Applying colors to areas difficult to define

When applying colors to areas that are difficult to
define or are small (such as maps), first apply
colors to the whole document, then apply white or
the desired color to the areas outside.
Key Procedure
1 When applying colors to the whole area (in this
case the map), you must define the whole area
with Rectangle Area so that the map is included.
Then apply Highlight to the whole area.
1.
Select Highlight, then select Rectangle
Area.
2.
To define the area, mark two points so that
the whole difficult to define area is
enclosed.
3.
Select a color from the Color Palette.
2
Without touching the map, use Point Outside
Area to apply white to the outside areas only.
1.
Select another Edit Number.
2.
Select Highlight, then select Point
Outside Area.
3.
To define the area, mark a point on the
area surrounding the difficult to define
area.
4.
Select a color from the Color Palette.
EDIT PAD USER GUIDE 9-5 EDITING TIPS AND PROBLEM-SOLVING
9
3
4
6