Displaying The Tools Mode Screen; G Displaying The Tools Mode Screen - Xerox Document Centre 706 Series User Manual

Displaying the Tools Mode screen

G The screen on the right is when the
Auditron feature is enabled. See
Chapter 9 Using the Auditron
Feature for details.
G If you made an error while entering
the access number, press the Clear
C button to clear and re-enter.
G Changing the access number of the
administrator in 6-3 Configuring the
Machine with Tools Mode for
information on how to change the
access number.
Displaying the Tools Mode
Screen
This section describes the procedures for displaying the Tools Mode screen.
You need to enter the access number of the System Administrator in order
to proceed with selecting the features on the Tools Menu.
The factory default for the access number is "11111".
Procedure
Press Settings/Meter Check.
Select Tools Mode.
Enter the access number of the System Administrator by
using the keypad and select Confirm.
Each input digit is represented by an asterisk.
G
Custom Presets
6-2 Displaying the Tools Mode Screen
G
6
153