Custom Colors; Network Settings - Xerox DocuColor 3535 User Manual

Custom Colors

Custom Colors 1 ~ 6

Network Settings

Ethernet Setting
TCP/IP - Get IP Address
4– 4 4
This sets up the user registered colors used in Single Color and
Dual Colors on the Output Color screen.
Assign user registered colors, Yellow (0~100%), Magenta
(0~100%), Cyan (0~100%), to Custom Color Buttons 1 ~ 6. The
default is 0.
NOTE: Adjust the registered color so that the sum of Yellow,
Magenta and Cyan is 240% or less.
Network Settings consists of Protocol Setting, which determines
the necessary condition for the communication.
Sets the Ethernet Setting for the machine.
Select one of the following settings. The default is 0, Auto
(10BASE-T/100BASE-TX).
• Auto (10BASE-T/100BASE-TX)
• 100BaseTX
• 10BaseT
Select the procedure for setting the IP address on the machine.
Select one of the following settings.
• DHCP - The IP address, Subnet Mask, and Gateway address
are automatically extracted from the DHCP server.
• BOOTP - The IP address, Subnet Mask, and Gateway
address are automatically extracted from the BOOTP server.
• Manual - Enables you to manually enter the IP address,
Subnet Mask, and Gateway address.
NOTE: The Subnet Mask and Gateway address cannot be
entered if the IP address is not set.
Xerox DocuColor 3535 Printer/Copier