Paper Path Areas - Xerox Document Centre 50 User Manual

1 Paper Tray 1
2 Paper Tray 2
3 Paper Tray 3
4 Paper Tray 4
2
2
5 Paper Tray 5
6 Preregistration Area
7 Transfer Belt
8 Fuser
3
9 Output Tray, Sorter/Mailbox or Finisher/Mailbox
10 Duplex path (10a, 10b, 10c)
As illustrated in Figure 17, the paper is fed from
the selected paper tray (1-5) to the Paper
Transport rollers.
The Paper Transport rollers deliver the paper to
the Preregistration Area (6) in the Paper Path
4
Module.
From the Preregistration Area, the paper is
registered onto the Transfer Belt (7), and the
image is transferred.
The paper proceeds to the Post Transfer Area and
into the Fuser (8), where the image is fixed to the
paper permanently.
5
From the Fuser, the paper passes either through
the Post Fuser Area and into the Output Tray,
Sorter/Mailbox or Finisher/Mailbox (9) or into the
duplex path (10a, 10b, 10c).
NOTE: All paper fed to the copier/printer from
Paper Tray 5 will always be delievered to the
6
Output Tray.
7
GETTING TO KNOW YOUR COPIER/PRINTER

Paper Path Areas

2–18
Figure 17: Paper Path
DOCUMENT CENTRE CS 50 USER GUIDE