Wren Kitchens INFINITY LINEA Fittings Manual page 3

Fixing the leg bases
Secure each of the leg brackets into place
with 4x15mm screws per bracket.
Inserting the legs
Push each leg firmly down into the leg
bracket. Adjusting each leg to 165mm.
Adjust the legs to the correct height by
turning clockwise or anti-clockwise.
Securing the L-bracket
Secure each of the L-brackets to the upper
rear of the unit using 2x15mm screws at each
side.
Removing the transport panel
Slide the transport panel out from the back of
the unit and discard the panel.
View from
the back of
the unit
Page 3