Subscribe to Our Youtube Channel
Related Manuals for Wren Kitchens Walk in 2070
Summary of Contents for Wren Kitchens Walk in 2070
- Page 1 TOWER UNIT 2070 & 2250 Walk in Assembly Guide 2070 - 2250 x600 1 Door 70/30 Door 50/50 Door For Internal Use: FI.WR.INS.014_WKIN0062_WalkIn_TowerGuide_Rev12.indd...
-
Page 2: Before You Start
TOWER UNIT BEFORE YOU START INSTALLATION 2070 & 2250 SHOULD BE Walk in PERFORMED BY A COMPETENT Assembly Guide PERSON ONLY. THIS PRODUCT COULD BE DANGEROUS IF INCORRECTLY INSTALLED 1Dr OPTION 70/30 OPTION 50/50 OPTION Panel A Panel B Panel C Panel D Panel sE Panel sM... - Page 3 TOWER UNIT Step 1. 2070 & 2250 Walk in Seat cam dowel (W) into holes in end panel (A) as Assembly Guide shown. Seat (W) cam dowel into hole as Step 2. shown. Seat dowel (F) into holes in end panel (A) as shown.
- Page 4 TOWER UNIT 2070 & 2250 Walk in Assembly Guide Step 5. Seat 10x dowels (F) into holes in both panels (sM) and (sE) as shown. Step 6. Slide back panel (C) into groove of end panel (A). Also insert dowels (F) (in orange) from panels (sM) and (sE) into the required holes in back panel (C).
- Page 5 TOWER UNIT Step 10. Seat dowel (F) into holes in 2070 & 2250 end panel (B) as shown. Walk in Assembly Guide Seat (W) cam dowel Step 11 into hole as Seat cam dowel (W) into shown. holes in end panel (B) as shown.
- Page 6 TOWER UNIT Step 14. Seat 10x dowels (F) into holes in 2070 & 2250 both panels (sM) and (sE) Walk in as shown. Assembly Guide Step 15. Secure back panel (D) to panels (sE) and (sM) and back panel (C). Use 20 x 45mm screws (K) as shown.
- Page 7 TOWER UNIT Step 17. Secure back panel (D) to end panel (B) at the 2070 & 2250 bottom. Use 4 x15mm screws (L) to 1 x L bracket Walk in LGE as shown. Assembly Guide Step 18. Hand tighten all cam locks (H), this will expand cam dowels (W) and tighten the unit together.
- Page 8 TOWER UNIT Step 20. Attach hinge plates onto end panel (A) or (B) to 2070 suit as shown. Walk in Hinge side to be mounted in accordance to Assembly Guide customer kitchen plan. 70/30 50/50 & 1 DOOR HINGE HINGE POSITION POSITION From Top...
- Page 9 TOWER UNIT Step 20. Attach hinge plates onto end panel (A) or (B) 2250 to suit as shown. Walk in Hinge side to be mounted in accordance to Assembly Guide customer kitchen plan. 70/30 50/50 HINGE HINGE POSITION POSITION From Top From Top 2156mm 2156mm...
- Page 10 TOWER UNIT Step 20. Attach hinge plates onto end panel (A) or (B) to 2250 1Dr suit as shown. Walk in Hinge side to be mounted in accordance to Assembly Guide customer kitchen plan. 1 Door HINGE POSITION From Top 2156mm 2124mm INSIDE...
- Page 11 INFINITY PLUS TOWER UNIT TOWER UNIT See Customer Specific Kitchen Plan For Tower Frontals 2070 & 2250 2070 & 2250 Walk in Walk in Step 21. Assembly Guide Assembly Guide Insert hinge where required in holes as shown. Step 22. Align doors &...
- Page 12 TOWER UNIT INFINITY 2070 & 2250 Walk in Assembly Guide Step 21. Insert hinge into hinge holes provided. Step 22. Secure hinges with the 2 x screws. Step 23. Attach the door to unit, clip hinge onto hinge plate and click to secure.
Need help?
Do you have a question about the Walk in 2070 and is the answer not in the manual?
Questions and answers