Wren Kitchens INFINITY LINEA Fittings Manual page 10

Securing the fridge/freezer to the top shelf
Using the screws provided with the appliance,
attach the fridge to the underside of the top
shelf in the unit. Please review the appliance
installation manual for the correct screw
placement as each fridge may be different.
This will firmly secure the fridge in place.
The installation manual should be reviewed to determine how the front of the fridge is attached to
Adjusting the hinge
To adjust the hinges, open the fridge and
locate them through the gap in the door. Use
a screwdriver as required at points 1 and 2.
Point 1 -Will adjust the frontal in and
out. Unscrew point 1 and move the door
outwards/inwards until in the desired location
and then retighten the screws to secure in
place.
Point 2 - Will adjust the frontals left and right.
Unscrew the screw at point 1 and adjust
both screws marked point 2, move the door
left/right until the desired location, then
retighten point 1 to secure in place.
To move the hinges up or down, loosen the
screws A and B. Manoeuvre the door, then
re-tighten the screws.
the frontal, as each manufacturer will be different.
Page 10