Wren Kitchens INFINITY LINEA Fittings Manual page 2

Remember to take care when unpacking. Please keep your workspace clean, clear
and tidy when working. This will help keep all items safe from any damages.
Any waste cardboard or plastic should be flattened down and placed in the bin.
A minimum of two people will be needed to lift the unit.
Removing the frontal
Before installing the unit, remove the frontal
by pulling the release catch.
Place the frontal in the door safe along its
longest length.
Removing the fittings
Remove all content so the unit is empty.
All fittings should be kept on a clean and level
surface and the shelf placed in the door safe
along its longest length.
Positioning the leg brackets
Locate the leg brackets and position, as
shown in the diagram. Ensure the leg
brackets are rotated so the flange covers the
outer edge, as this provides support for the
edge of the unit.
Page 2