ProLights Astra Profile900HQ User Manual page 15

10 - MENU STRUCTURE
The following chart describes the MENU tree of the product, the terms shown in BOLD indicates the
default settings.
LEVEL 1 LEVEL 2
DMX ADDRESS DMX
ARTNET
SACN
STANDARD
DMX MODE
WIRELESS
CRMX
ON/OFF
CRMX MODE
TX LINK
TX UNLINK
RX RESET
IN TO CRMX (TX)
CRMX TO DMX
(RX)
LINKING KEY
UNIVERSE
METADATA
LINK STRENGTH
CRMX SOFTWARE
VERSION
MENU: CONNECT
LEVEL 3 LEVEL 4
1-512
ON
OFF
TX CRMX
TX G4S
TX G3
RX
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SET LINKING
KEY
UNIVERSE NAME xxx
UNIVERSE RED
COLOR
FIRE
YELLOW
GREEN
EMERALD
OCEAN
BLUE
DEEP PURPLE
COOL WHITE
** %
TimoFX: Vx.x.xx
PROLIGHTS - Astra Profile900HQ
LEVEL 5
Set DMX Address for Main fixture
Enable the wireless card.
Allows configuration of the wireless card
as either a Transmitter or Receiver. G4s
and G3 are supported protocols for con-
nection with Wireless Solution products.
Enables the transmission link when the
unit is set as a Transmitter.
Disconnects the transmitter from all con-
nected receivers. TX Unlink can only be
used when the unit is in Transmitter mode
in CRMX settings.
Disconnects the CRMX card, set as a Re-
ceiver, from any connected transmitters.
Enable/Disable the transmission of the
DMX from the transmitter to the receiver
Enable/Disable the retransmission of the
DMX from the receiver to the other units
connected by cable to the receiver itself
RX MODE: Linking key section available
only in RX mode.
8 digit code TX MODE: When in TX mode, message
on screen: "Linking Key available only in
RX Mode: received from TX;
TX CRMX Mode: default first 16 charac-
ters of Model Name:
(DEVICELABEL-Last 4 digit of RDM UID)
Universe Color can be set only if CRMX
If CRMX Mode@RX, Universe Color
shows the one set on the TX
Show Wireless quality by percentage
Show firmware version of TimoFX
DESCRIPTION
via CRMX
RX Mode"
Mode@TX;
module
13