Component Locations
Component Locations
Following are descriptions of the major library components and their locations.
Figure 1–2.
Front View of the PowerVault 130T Library
The locations below are described as you face the front of the library:
Operator Panel
Cartridge Access Port
Hand/Camera Assembly
Theta Motor
Z Motor
1–2
The operator panel is at the top left, above the
cartridge access port.
The cartridge access port (CAP) is at the lower
left, below the operator panel.
The hand/camera assembly is at the front of the
library inside the door, mounted to the bearing
block on the Z column.
The theta motor is at the bottom right corner,
inside the front door.
The Z motor is at the top of the Z column, attached
by four screws to the Z motor bracket.
PowerVault 130T Service Manual
4473D