Attaching The Front Brackets To The Library Chassis; Attaching The Rear Brackets To The Rails - Dell PowerVault TL1000 User Manual

8
Figure 19. Attaching the front brackets to the library chassis
5. Attach the left 1 and right 2 rear brackets to the left 5 and right 6 front rails with 2
round-head screws 10 on each side (Figure 20).
Figure 20. Attaching the rear brackets to the rails
Important: Do NOT tighten these screws completely.
6. Slide in the rear rails 7 from back to front, to create the rail assemblies. Ensure that the screw holes
face outwards (Figure 21 on page 25).
24
Dell PowerVault TL1000 Tape Autoloader: User's Guide
3
11
1
4
8
12
10
5
6
2