•
Configuration Upload Destination—Specifies the Configuration file path from
which the file is uploaded.
•
Configuration Upload Transfer file name—Indicates the software file to which the
configuration is uploaded. The possible field values are:
–
Running Configuration—Uploads the Running Configuration file.
–
Startup Configuration—Uploads the Startup Configuration file.
–
Backup Configuration—Uploads the Backup file.
Uploading files:
Open the File Upload to Server page.
1
Define the file type to upload.
2
Define the TFTP Server IP Address, Destination, and Transfer file name fields.
3
Click Apply Changes. The software is uploaded to the device.
4
Uploading Files Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the File Upload to Server page.
CLI Command
copy source-url destination-url
[snmp]
The following is an example of the CLI commands:
-----------------------------------------------------
console# copy tftp://16.1.1.200/file1 image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!2883576 bytes
copied in 00:00:10 [hh:mm:ss]
Description
Copies any file from a source to a
destination.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
181