Dell PowerConnect 3324 User Manual page 172

S N M P Tr a p S e t t i n g s P a g e
The SNMP Trap Settings page contains the following fields:
• SNMP Trap—Enables sending SNMP traps or SNMP notifications from the switch to
defined trap recipients. The possible field values are:
–
–
• Authentication Trap—Enables sending SNMP traps when authentication fails to
defined recipients. The possible field values are:
–
–
• Select Recipient IP—Specifies the IP address to whom the traps are sent.
• Traps —Determines the trap type sent to the selected recipient. The possible field
values are:
–
–
–
• Community String—Identifies the community string of the trap manager.
• Remove—Removes Trap Manager Table entries.
172 Configuring System Infor m ation
Enable—Enables sending SNMP traps or SNMP notifications.
Disable—Stops all SNMP traps from being sent.
Enable—Enables sending SNMP traps when authentication failed.
Disable—Disables sending SNMP traps when authentication failed.
SNMP V1—Indicates SNMP Version 1 traps are sent.
SNMP V2c—Indicates SNMP Version 2 traps are sent.
Disable—Disables sending traps to the recipient.