Dell PowerConnect 3324 User Manual page 234

• Address Table Sort Key—Specifies the method by which the Dynamic Address Table
is sorted. The possible field values are:
–
–
–
The Query Results Table contains the following columns:
• VLAN ID—Indicates the VLAN Tag value.
• MAC—Indicates the MAC address.
• Port—Indicate the port that is attached to the dynamic MAC address.
• Type—Indicates the MAC address type.
Redefining the Aging Time:
Open the Dynamic Address Table.
1
Define the Aging Time field.
2
Click Apply Changes. The aging time is modified, and the device is updated.
3
Querying the Dynamic Address Table:
Open the Dynamic Address Table.
1
Define the parameter by which to query the Dynamic Address Table. The Dynamic
2
Address Table entries can be queried by interface, MAC Address, or VLAN.
Click Query. The Dynamic Address Table is queried. The query results are sorted by
3
the selected Address Table Sort Key field value.
Querying and Sorting Dynamic Addresses Using CLI Commands
The following table summarizes the equivalent CLI commands for querying and sorting
dynamic addresses as displayed in the Dynamic Address Table page.
CLI Command
bridge aging-time seconds
234 Configuring Switch Infor m ation
Address—Sorts the query results for a designated MAC address.
VLAN—Sorts the query results by VLAN ID.
Interface—Sorts the query results by interface, and displays all MAC addresses
that have been learned on the designated port.
Description
Sets the address table aging time.