G V R P P a r a m e t e r s P a g e
The GVRP Parameters page contains the following fields:
•
GVRP Global Status—Enables GVRP on the device. The possible field values are:
–
Enabled—Indicates GVRP is enabled on the device.
–
Disabled—Indicates GVRP is disabled on the device. This field value is the
default.
•
Interface—Indicates the specific interface for which GVRP is enabled. The possible
field values are:
–
Port—Indicates the specific port for which GVRP is enabled.
–
LAG—Indicates the specific LAG for which GVRP is enabled.
•
GVRP State—Indicates if GVRP is enabled on a port. The possible field values are:
–
Enable—Enables GVRP on the interface.
–
Disable—Disables GVRP on the interface. This is the default value.
•
Dynamic VLAN Creation—Enables VLAN creation through GVRP . The possible field
values are:
–
Enable—Enables creating VLANs through GVRP .
Configuring Switch Infor mation
269