Dell PowerConnect 3324 User Manual page 132

Dell switch user manual
Hide thumbs Also See for PowerConnect 3324:
Table of Contents

Advertisement

I P I n t e r f a c e Ta b l e P a g e
Deleting IP addresses:
Open the IP Interface page.
1
Click Show All. The IP Interface Table page opens.
2
Select an entry in the IP Interface Table.
3
Check the Remove check box to remove IP addresses.
4
Click Apply Changes. The IP address is deleted, and the device is updated.
5
Defining IP Interfaces Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the IP Interface Parameters page.
CLI Command
ip address ip-address {mask | prefix-
length}
no ip address [ip-address]
show ip interface [ethernet interface-number |
vlan vlan-id | port-channel number]
The following is an example of the CLI commands:
Console (config)# interface vlan 1
Console (config-if)# ip address 131.108.1.27 255.255.255.0
Console (config-if)# no ip address 131.108.1.27
Console (config-if)# exit
Console# show ip interface vlan 1
132
Configuring System Infor m ation
Description
Sets an IP address.
Removes an IP address
Displays the usability status of
interfaces configured for IP .

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 3348

Table of Contents