–
Warning—Indicates the lowest level of a device warning. The device is
functioning, but an operational problem has occurred.
–
Notice—Provides the network administrators with device information.
–
Informational—Provides device information.
–
Debug—Provides detailed information about the log. If a Debug error occurs,
contact Dell Online Technical Support (www.support.dell.com).
NOTE: When a severity level is selected, all severity level choices above the selection are
selected automatically.
The Global Log Parameters page also contains check boxes that correspond to a distinct
logging system:
•
Console—Indicates the minimum severity level from which logs are sent to the
console.
•
RAM Logs—Indicates the minimum severity level from which logs are sent to the Log
File kept in RAM (Cache).
•
Log File—Indicates the minimum severity level from which logs are sent to the Log
File kept in FLASH memory.
Enabling Logs:
Open the Global Log Parameters page.
1
Select Enable in the Logging drop-down list.
2
Select the log type and log severity in the Global Log Parameters check boxes.
3
Click Apply Changes. The log settings are saved, and the device is updated.
4
Enabling Logs Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Global Log Parameters page.
CLI Command
logging on
logging ip-address [port port]
[severity level] [facility
facility] [description text]
logging console level
Description
Enables error message logging.
Logs messages to a syslog server. For a list of the Severity levels,
see
"Log Severity
Levels".
Limits messages logged to the console based on severity.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
117