Dell PowerConnect 3324 User Manual page 131

– Port—Indicates that the IP address was assigned to a port.
– LAG—Indicates that the IP address was assigned to a Link Aggregated Group
(LAG).
– VLAN—Indicates that the IP address was assigned to a VLAN.
• Type—Indicates whether the IP address was defined manually as a static IP address or
automatically through DHCP .
• Remove—Removes the selected interface from the IP Address drop-down list.
– Checked—Removes the interface from the IP Address drop-down list.
– Unchecked—Maintains the interface in the IP Address drop-down list.
Adding an IP Interface:
Open the IP Interface Parameters page.
1
Click Add. The Add a Static IP Interface page opens:
2
A d d A S t a t i c I P I n t e r f a c e P a g e
Define the IP Address, Interface, Network Mask, or the Prefix Length fields.
3
Select the interface to which the IP interface will be assigned.
4
Click Apply Changes. The new interface is added, and the device is updated.
5
Displaying the IP Interface Table:
Open the IP Interface Parameters page.
1
Click Show All. The IP Interface Table page opens. The IP Interface Table contains
2
the same fields as the "Defining IP Interfaces".
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
131