Define the IP Address, Priority, Authentication Port, Number of Retries, Timeout for
3
Reply, Dead Time, Key String, and Source IP Address fields.
Click Apply Changes. The new RADIUS server is added, and the device is updated.
4
Displaying the RADIUS Server List:
Open the RADIUS Settings page.
1
Click Show All. The RADIUS Servers List page opens.
2
R A D I U S S e r v e r s L i s t P a g e
Modifying the RADIUS Server settings:
Open the RADIUS Settings page.
1
Click Show All. The RADIUS Servers List page opens.
2
Modify the Priority, Number of Retries, Timeout for Reply, or Dead Time fields.
3
Click Apply Changes. The RADIUS Server settings are modified, and the device is
4
updated.
Deleting a RADIUS Server for the RADIUS Servers List:
Open the RADIUS Settings page.
1
Click Show All. The RADIUS Servers List page opens.
2
Select a RADIUS Server in the RADIUS Servers List .
3
Check the Remove check box. The RADIUS server is removed from the RADIUS
4
Servers List.
Defining RADIUS Servers Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the RADIUS Settings page.
166
Configuring System Infor m ation