Downloading The Software Via The Powerconnect 3324/3348 Dell Openmanage Switch Administrator - Dell PowerConnect 3324 User Manual

Enter
6
This command will reset the whole system and disconnect your
current
session. Do you want to continue (y/n) [n] ?
Enter
7
Repeat step 3 to verify which Image files are active.
8
Enter
9
information which displays:
console# copy image unit://2/image
...................Unit 2: Erased image-2
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!
Copy: 2883576 bytes copied in 00:01:35 [hh:mm:ss]
console# 01-Jan-2000 01:08:59 %COPY-W-TRAP: The copy operation was
completed successfully
Enter
10
Repeat step 9 for each Stacking unit.
11
Enter
12
This command will reset the whole system and disconnect your
current
session. Do you want to continue (y/n) [n] ?
Enter
13
Repeat steps 2 and 3 to ensure the correct Image file is active.
14
Downloading the Software Via the PowerConnect 3324/3348 Dell
OpenManage Switch Administrator
For instructions on downloading the software via the Dell OpenManage Switch
Administrator, see
84 C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h
. The following message displays:
console# reload
. The device reboots.
Y
console# copy image unit://2/image
console# boot system unit {unit number} image-{file name}
. The following message displays:
console# reload
. The device reboots.
Y
"Managing Files".
. The following is an example of the
.