Dell PowerConnect 3324 User Manual page 107

• Asset Tag—Specifies the user-defined device reference.
• Serial No.—Indicates the serial number of the device.
Defining system information:
Open the Asset page.
1
Define the System Name, System Contact, System Location, Date, Asset Tag, and
2
Time fields.
Click Apply Changes. The system parameters are defined, and the device is updated.
3
Initiating a Telnet Session:
Open the Asset page.
1
Click Telnet. A Telnet session is initiated.
2
Configuring Device Information Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Asset page.
CLI Command
hostname name
snmp-server contact text
snmp-server location text
clock set hh:mm:ss day
month year
show clock
show system id
show system
asset tag
The following is an example of the CLI commands:
Console (config)# hostname dell
Console (config)# snmp-server contact Dell_Tech_Supp
Description
Specifies or modifies the device host name.
Sets up a system contact.
Enters information on where the device is
located.
Manually sets the system clock and date. Note
the different date format.
Displays the time and date from the system
clock.
Displays the service tag information.
Displays system information.
Displays the device asset tag.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
107