NOTE: The following relationships between the various timer values must be maintained: Leave
time must be greater than or equal to three times the join time. Leave-all time must be greater
than the leave time.
Defining GARP Timers:
Open the GARP Timers page.
1
Define the Interface, GARP Join Time, GARP Leave Timer, and GARP Leave All
2
Timer.
Click Apply Changes. The GARP parameters are saved to the device.
3
Displaying the GARP Timers Table:
Open the GARP Timers page.
1
Click Show All. The GARP Timers Table opens.
2
G A R P T i m e r s Ta b l e
In addition to the GARP Timers page fields, the GARP Timers Table page also displays the
following fields:
•
Unit No.—Indicates the stacking unit number.
•
Copy From—Copies the port GVRP parameters to interfaces specified in the Copy to
field.
•
Copy To—Indicates the interfaces to which the GVRP Timers are copied.
Copying GARP Information:
Open the GARP Timers page.
1
Click Show All. The GARP Timers Table opens.
2
238
Configuring Switch Infor m ation