CLI Command
channel-group port-channel-
number mode {on | auto}
show interface port_channel
The following is an example of the CLI commands:
Console# channel-group port-channel-number mode on auto 1
Port-Channel 1:Port Type 1000 Ethernet
Partner
Multicast Forwarding Support
Multicast forwarding allows a single packet to be forwarded to multiple destinations. L2
Multicast service is based on a L2 switch receiving a single packet addressed to a specific
multicast addresses. Multicast forwarding creates copies of the packet, and transmits the
packets to the relevant ports.
PowerConnect 3324/3348 supports both:
•
Forwarding L2 Multicast Packets—Enabled by default.
•
Filtering L2 Multicast Packets—Enables forwarding L2 packets to ports VLAN. If
multicast filtering is disabled, multicast packets are flooded to all relevant VLAN
ports.
280
Configuring Switch Infor m ation
Description
Configures a port to a Port channel.
Displays the interfaces attached to a LAG.
Actor
System Priority:1
MAC Address:
Admin Key:
29
Oper Key:
29
System Priority:0
MAC Address:
Oper Key:
14
000285:0E1C00
000000:000000