Dell PowerConnect 3324 User Manual page 129

Define the Default Gateway IP Address field.
3
OR
Set the new gateway as active by checking the check box.
Click Apply Changes. The new default Gateway device is defined, and the device is
4
updated.
Displaying the Default Gateway Table:
Open the Default Gateway page.
1
Click Show All. The Default Gateway Table opens.
2
D e f a u l t G a t e w a y Ta b l e P a g e
Removing a Default Gateway device:
Open the Default Gateway page.
1
Click Show All. The Default Gateway Table page opens.
2
Select a Default Gateway Table entry.
3
Check the Remove check box to remove default gateways.
4
Click Apply Changes. The Default Gateway Table entry is removed, and the device is
5
updated.
Defining Gateway devices Using the CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the Default Gateway page.
CLI Command
ip default-gateway ip-address1 [ip-address2.]
Description
Defines a default gateway.
C o n f i g u r i n g S y s t e m I n f o r ma t i o n
129