Dell XFR D630 Service Manual page 99

d. Install these 3 gaskets from the original system board onto the new system board.
NOTICE: When installing the system board, ensure that the fan cable antenna cables, and the 3
modem cables are clear of the system board before fitting it into the base, that the audio
connectors are properly seated, and that the tab for the wireless switch fits properly into the
detent on the slider mechanism before installing the system board into the base.
Once system board is partially seated, position the modem cables and the antenna cables by the RF
passthru board so they are not pinched.
Page 99 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
Three gaskets
Wireless
Switch
Revision A01