6. Remove the palm rest (see
7. Disconnect the speaker connector from the system board.
2
1
1
Speaker
NOTICE: Handle the speakers with care to avoid damaging them.
8. Pull the speaker straight up and out of the base.
20.2
Installing the Speaker
1. Install the speaker in the base and attach the speaker cable to the system board.
2. Replace the palm rest (see
NOTE: Ensure that you reconnect the coin-cell battery (see
the keyboard.
3. Replace the display assembly (see
4. Replace the keyboard (see
5. Replace the media bay device (see
6. Replace the hinge cover (see
7. Replace the battery.
21 Fan
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User's Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
21.1
Removing the Fan
Page 93 of 106
TM
Dell
XFR D630 Fully Rugged Notebook Service Manual
R emoving the Palm Rest).
2 4 1 H
2
Speaker connector
I nstalling the Palm Rest).
2 4 2 H
I nstalling the Display Assembly).
2 4 4 H
K eyboards).
2 4 5 H
X Bay Devices).
2 4 6 H
I nstalling the Hinge Cover).
2 4 7 H
C oin-Cell Battery) before you replace
2 4 3 H
Revision A01