System Board; Removing The System Board - Dell XFR D630 Service Manual

5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the media bay device (see
8. Replace the hinge cover (see

22 System Board

22.1

Removing the System Board

CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User's Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the
bottom of the computer. The replacement kit for the system board includes a CD that provides a utility
for transferring the Service Tag to the replacement system board.
1. Follow the instructions in
2. Remove the hard disk drive (see
3. Remove the hinge cover (see
4. Remove the keyboard (see
5. Remove any installed media bay device (see
6. Remove the memory module(s) (see
7. Remove the palm rest (see
8. Remove any installed wireless communications cards (see
Local Area Network (WLAN) Cards,
9. Remove the modem (see
9. Remove the speaker (see
10. Remove the PC Card reader (see
11. Remove any installed smart cards or smart card blanks from the smart card slot.
Page 95 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
I nstalling the Display Assembly).
2 5 8 H
K eyboards).
2 5 9 H
X Bay Devices).
2 6 0 H
I nstalling the Hinge Cover).
2 6 1 H
B efore You Begin.
2 6 2 H
H ard Drive).
2 6 3 H
R emoving the Hinge Cover).
2 6 4 H
K eyboards).
2 6 5 H
M emory).
2 6 7 H
R emoving the Palm Rest).
2 6 8 H
Internal Card with Bluetooth® Wireless Technology).
2 7 1 H
R emoving the Modem).
2 7 2 H
R emoving the Speaker).
2 7 3 H
R emoving the PC Card Cage).
2 7 4 H
X Bay Devices).
2 6 6 H
W WAN, FCM & SIM Cards,
2 6 9 H
W ireless
2 7 0 H
Revision A01