1
smart card slot
12. Remove the processor thermal-cooling assembly (see
Cooling Assembly).
13. Remove the processor (see
14. Disconnect the fan cable from the system board.
16. Disconnect the cables near the WLAN card and the modem connector from the system board.
17. Remove the four M2.5 x 5-mm screws (labeled with silver triangles on the system board).
Page 96 of 106
TM
Dell
XFR D630 Fully Rugged Notebook Service Manual
R emoving the Processor).
2 7 6 H
1
R emoving the Processor Thermal-
2 7 5 H
WLAN
Connector
Fan
Connector
Modem
Connector
Speaker
Connector
Revision A01