Removing The Processor Thermal-Cooling Assembly - Dell XFR D630 Service Manual

17.1 Removing the Processor Thermal-Cooling
Assembly
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User's Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove any installed media bay device (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the palm rest (see
7. Remove the fan cover by removing the 4 screws that secure the fan cover, and then lift the
fan cover out of the base.
Fan cover
screws (4)
8. Remove, in consecutive order, the three screws labeled "1" through "3," on the assembly.
Page 86 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
B efore You Begin.
1 9 7 H
R emoving the Hinge Cover).
1 9 8 H
K eyboards).
2 0 0 H
R emoving the Display Assembly).
2 0 1 H
R emoving the Palm Rest).
2 0 2 H
X Bay Devices).
1 9 9 H
Revision A01