Installing The Modem; Processor Thermal-Cooling Assembly - Dell XFR D630 Service Manual

1 modem pull-tab
4 system board connector
NOTICE: Do not disconnect the modem cable from the system board.
9. Disconnect the modem cable from the modem.
16.2

Installing the Modem

NOTE: When replacing the modem, it is easier to connect the modem cable to the modem before
you press the modem into the system board connector.
1. Connect the modem cable to the modem.
2. Connect the modem to the connector on the system board.
3. Install the M2 x 3mm screw that attaches the modem to the system board.
4. Replace the palm rest (see
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the hinge cover (see

17 Processor Thermal-Cooling Assembly

Page 85 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
2 M2 x 3-mm screw
I nstalling the Palm Rest).
1 9 3 H
I nstalling the Display Assembly).
1 9 4 H
K eyboards).
1 9 5 H
I nstalling the Hinge Cover).
1 9 6 H
3 modem cable
Revision A01