Modem; Removing The Modem - Dell XFR D630 Service Manual

4. Replace the palm rest (see
5. Replace the display assembly (see
6. Replace the keyboard (see
7. Replace the hinge cover (see

16 Modem

CAUTION: Before you begin the following procedure, see the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User's Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
NOTICE: To avoid damaging the system board, you must remove the main battery before you
begin working inside the computer (see
16.1

Removing the Modem

1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove any installed media bay device (see
4. Remove the keyboard (see
5. Remove the display assembly (see
6. Remove the palm rest (see
7. Remove the M2 x 3-mm screw that attaches the modem to the system board.
8. Pull up on the pull-tab to disconnect the modem from the connector on the system board.
Page 84 of 106
TM
Dell XFR D630 Fully Rugged Notebook Service Manual
I nstalling the Palm Rest).
1 8 2 H
I nstalling the Display Assembly).
1 8 3 H
K eyboards).
1 8 4 H
I nstalling the Hinge Cover).
1 8 5 H
B efore Working Inside Your Computer).
1 8 6 H
B efore You Begin.
1 8 7 H
R emoving the Hinge Cover).
1 8 8 H
K eyboards).
1 9 0 H
R emoving the Display Assembly).
1 9 1 H
R emoving the Palm Rest).
1 9 2 H
X Bay Devices).
1 8 9 H
Revision A01